Braindump2go Promise You Pass New Exam 70-410 One Time Just Using 70-410 Latest Released Exam Questions (291-305)

Download Microsoft Exam Center Latest Updated 70-410 Exam Questions from Braindump2go for free now! Braindump2go 70-410 Dumps Questions ans Answers are the Latest and also provide free updation for all Exam Dumps! Guarantee 100% Exam Pass Or Money Back!

Vendor: Microsoft
Exam Code: 70-410
Exam Name: Installing and Configuring Windows Server 2012 R2 Exam

1[14]

QUESTION 291
Your network contains an Active Directory forest named contoso.com.
The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to ensure that User1 can manage the group membership of Group1. The solution must minimize the number of permissions assigned to User1.
Which cmdlet should you run?

A.    Add-AdPrincipalGroupMembership
B.    Install- AddsDomainController
C.    Install- WindowsFeature
D.    Install-AddsDomain
E.    Rename-AdObject
F.    Set-AdAccountControl
G.    Set-AdGroup
H.    Set-User

Answer: G
Explanation:
http://technet.microsoft.com/en-us/library/ee617199.aspx
The Set-ADGroup cmdlet modifies the properties of an Active Directory group.
You can modify commonly used property values by using the cmdlet parameters.

QUESTION 292
Your network contains an Active Directory forest named contoso.com.
The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to prevent User1 from changing his password. The solution must minimize administrative effort.
Which cmdlet should you run?

A.    Add-AdPrincipalGroupMembership
B.    Install- AddsDomainController
C.    Install- WindowsFeature
D.    Install-AddsDomain
E.    Rename-AdObject
F.    Set-AdAccountControl
G.    Set-AdGroup
H.    Set-User

Answer: F
Explanation:
http://technet.microsoft.com/en-us/library/ee617249.aspx
Set-ADAccountControl
The Set-ADAccountControl cmdlet modifies the user account control (UAC) values for an Active Directory user or computer account. UAC values are represented by cmdlet parameters.
CannotChangePassword
Modifies the ability of an account to change its password. To disallow password change by the account set this to $true.. This parameter changes the Boolean value of the CannotChangePassword property of an account.
The following example shows how to specify the PasswordCannotChange parameter.
-CannotChangePassword $false

QUESTION 293
You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter. Host1 contains two virtual machines named VM1 and VM2.
You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN. Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    On VM1, configure a Fibre Channel adapter.
B.    On Host1, configure a new virtual switch.
C.    On VM1, add a network adapter.
D.    On Host1, configure a new Virtual Fibre Channel SAN.
E.    On Host1, modify the Hyper-V settings.

Answer: AD
Explanation:
Step 1:
D: Building a Virtual SAN
The process of setting up virtual Fibre Channel starts with building a virtual SAN. The easiest way to accomplish this is to open the Hyper-V Manager, right click on the listing for your Hyper-V server in the console tree, and then choose the Virtual SAN Manager command from the shortcut menu.
Step 2:
A: Once you have created a virtual SAN, the next step in the process is to link a virtual machine to the virtual SAN. To do so, right click on the virtual machine for which you want to provide Fibre Channel connectivity and select the Settings command from the resulting shortcut menu. Next, select the Add Hardware container, as shown in the figure above, and then select the Fibre Channel Adapter option from the list of available hardware. Etc.
Note:
* Virtual Fibre Channel for Hyper-V (also referred to as Synthetic Fibre Channel) provides VM guest operating systemswith direct access to a Fibre Channel SAN by using a standard World Wide Name (WWN) associated with a virtual machine

QUESTION 294
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the HyperV server role installed. Server1 has 8 GB of RAM. Server1 hosts five virtual machines that run Windows Server 2012 R2. The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)

wps7265.tmp_thumb

You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?

A.    BIOS
B.    Automatic Start Action
C.    Automatic Stop Action
D.    Integration Services

Answer: C
Explanation:
http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/

wps9AEC.tmp_thumb

QUESTION 295
You have a laptop named Computer1. Computer1 runs Windows 8 Enterprise.
Computer1 has a wired network adapter and a wireless network adapter. Computer1 connects to a wireless network named Network1.
For testing purposes, you install Windows Server 2012 R2 on Computer1 as a second operating system.
You install the drivers for the wireless network adapter.
You need to ensure that you can connect to Network1 from Windows Server 2012 R2.
What should you do?

A.    From a local Group Policy object (GPO), configure the Wireless Network (IEEE 802.11) Policies settings.
B.    From a local Group Policy object (GPO), configure the settings of Windows Connection Manager.
C.    From Server Manager, install the Wireless LAN Service feature.
D.    Restart the WLAN AutoConfig service.

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/hh994698.aspx
The Wireless LAN service is a feature in Windows Server® 2012 R2 that you can use to enable the wireless WLAN AutoConfig service, and to configure the WLAN AutoConfig service for automatic startup. Once enabled, the WLAN AutoConfig service dynamically selects which wireless network the computer automatically connects to, and configures the necessary settings on the wireless network adapter. This includes automatically selecting and connecting to a more preferred wireless network when one becomes available.
To enable the Wireless LAN Service
In Server Manager Dashboard, click Manage, and then click Add Roles and Features. The Add Roles and Features Wizard opens.
Click Next. In Select installation type, select Role-based or feature-based installation, and then click Next.
In Select destination server, enable Select a server from the server pool, and in Server Pool, select the server for which you want to enable the Wireless LAN Service, and then click Next.
In Select server roles, click Next.
In Select Server features, in Features, select Wireless LAN Service, and then click Next.

QUESTION 296
Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 on a new server named Server1 and you join Server1 to the domain.
You need to ensure that you can view processor usage and memory usage information in Server Manager.
What should you do?

A.    From Server Manager, click Configure Performance Alerts.
B.    From Server Manager, click Start Performance Counters.
C.    From Performance Monitor, start the System Performance Data Collector Set (DCS).
D.    From Performance Monitor, create a Data Collector Set (DCS).

Answer: B
Explanation:

wpsC3A2.tmp_thumb

QUESTION 297
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You need to modify the SAM account name of Group1.
Which cmdlet should you run?

A.    Add-AdPrincipalGroupMembership
B.    Install AddsDomainControNer
C.    Install WindowsFeature
D.    Install AddsDomain
E.    Rename-AdObject
F.    Set-AdAccountControl
G.    Set-AdGroup
H.    Set-User

Answer: E

QUESTION 298
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots.
You need to modify the snapshot file location of VM1.
What should you do?

A.    Right-click VM1, and then click Export…
B.    Shut down VM1, and then modify the settings of VM1.
C.    Delete the existing snapshots, and then modify the settings of VM1.
D.    Pause VM1, and then modify the settings of VM1.

Answer: C
Explanation:
http://doquent.wordpress.com/2012/09/02/relocating-a-hyper-v-vm-folder/

wpsE95B.tmp_thumb

It is not A, watch this: http://www.youtube.com/watch?v=YvwtpPQk0Cs

QUESTION 299
Hotspot Question
The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit. (Click the Exhibit button.)

wps758.tmp_thumb

The settings for Diskl.vhdx are configured as shown in the Diskl.vhdx exhibit. (Click the Exhibit button.)

wps244B.tmp_thumb

The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit. (Click the Exhibit button.)

wps3E70.tmp_thumb

Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.

wps599F.tmp_thumb

Answer:

wps7338.tmp_thumb

QUESTION 300
You have a server named Server1 that runs Windows Server 2012 R2. A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.)

wps8D1F.tmp_thumb

You need to ensure that you can enable NTFS disk quotas for volume D.
What should you do first?

A.    Install the File Server Resource Manager role service.
B.    Format volume D.
C.    Run the convert.exe command.
D.    Convert the disk to a dynamic disk.

Answer: B
Explanation:
http://blogs.technet.com/b/askpfeplat/archive/2013/01/02/windows-server-2012-does-refs-replace-ntfs-when-should-i-use-it.aspx
REFS to NTFS requires format not convert.exe

QUESTION 301
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Print1 that runs Windows Server 2012 R2. Print1 has 50 shared printers. Each printer is listed in Active Directory. From Active Directory Users and Computers, you browse to Print1 and you discover that the 50 printers are not visible.
You need to ensure that you can view the printer objects in Active Directory Users and Computers. Which option should you select? To answer, select the appropriate option in the answer area.

wpsB596.tmp_thumb

Answer:

wpsCCCF.tmp_thumb

QUESTION 302
You have a file server named File1 that runs Windows Server 2012 R2. File1 contains a shared folder named Share1. Share1 contains an Application named SalesApp1.exe.
The NTFS permissions for Share1 are shown in the following table.

wpsE87A.tmp_thumb2

The members of L_Sales discover that they cannot add files to Share1.
Domain users can run SalesApp1.exe successfully.
You need to ensure that the members of L_Sales can add files to Share1.
What should you do?

A.    Add the Domain Users group to L_Sales.
B.    Add L_Sales to the Domain Users group.
C.    Edit the Share permissions.
D.    Edit the NTFS permissions.

Answer: C
Explanation:
http://www.techrepublic.com/article/windows-101-know-the-basics-about-ntfs-permissions/
The least restrictive permission applies here, so the users from L_sales have read & execute, write… in order to add files they need the NTFS permission called MODIFY.
Based on NTFS permissions:
Modify: Users can view and modify files and file properties, including deleting and adding files to a directory or file properties to a file.

QUESTION 303
Hotspot Question
You have a file server named Server1 that runs Windows Server 2012 R2.
Server1 contains a folder named Folder1.

wps20F9.tmp_thumb

A user named User1 is a member of Group1 and Group2.
A user named User2 is a member of Group2 and Group3.
You need to identify which actions the users can perform when they access the files in Share1. What should you identify? To answer, select the appropriate actions for each user in the answer area.

wps3AB1.tmp_thumb

Answer:

wps55A1.tmp_thumb

QUESTION 304
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed. On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1.
When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear. You need to view the Deployed Printers node in GPO1.
What should you do?

A.    On Server1, modify the Group Policy filtering options of GPO1.
B.    On a domain controller, create a Group Policy central store.
C.    On Server2, install the Group Policy Management feature.
D.    On Server1, configure the security filtering of GPO1.

Answer: C
Explanation:
Pre-Requisites
To use Group Policy for printer deployment you will need to have a Windows Active Directory domain, and this article assumes that your Domain Controller is a Windows 2008 R2 Server. You will also need the Print Services role installed on a server (can be on your DC), and you will be using the Print Management and Group Policy Management consoles to configure the various settings. Its assumed that you have already followed Part One and have one or more printers shared on your server with the necessary drivers, ready to deploy to your client computers.
The wording does not say if GPMC is installed on server 2, so I can only think that it does not deploy the GPO because it had no GPMC on server 2..
GPMC is not installed by default:
http://pipe2text.com/?page_id=1591
http://technet.microsoft.com/en-us/library/cc725932.aspx

QUESTION 305
Your network contains an Active Directory domain named contoso.com.
All of the App1ocker policy settings for the member servers are configured in a Group Policy object (GPO) named GPO1.
A member server named Server1 runs Windows Server 2012 R2.
On Server1, you test a new set of AppLocker policy settings by using a local computer policy.
You need to merge the local AppLocker policy settings from Server1 into the AppLocker policy settings of GPO1.
What should you do?

A.    From Local Group Policy Editor on Server1, exportan .xml file. Import the .xml file by using Group
Policy Management Editor.

B.    From Local Group Policy Editor on Server1, exportan .inf file. Import the .inf file by using Group Policy
Management Editor.

C.    From Server1, run the Set-AppLockerPolicy cmdlet.

D.    From Server1, run the New-AppLockerPolicy cmdlet.

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/ee791816(v=ws.10).aspx
The Set-AppLockerPolicy cmdlet sets the specified Group Policy Object (GPO) to contain the specified AppLocker policy. If no Lightweight Directory Access Protocol (LDAP) is specified, the local GPO is the default. When the Merge parameter is used, rules in the specified AppLocker policy will be merged with the AppLocker rules in the target GPO specified in the LDAP path. The merging of policies will remove rules with duplicate rule IDs, and the enforcement setting specified by the AppLocker policy in the target GPO will be preserved. If the Merge parameter is not specified, then the new policy will overwrite the existing policy.


Thanks For Trying Braindump2go Latest Microsoft 70-410 Dumps Questions! Braindump2go Exam DumpsADVANTAGES:

☆ 100% Pass Guaranteed Or Full Money Back!
☆ Instant Download Access After Payment!
☆ One Year Free Updation!
☆ Well Formated: PDF,VCE,Exam Software!
☆ Multi-Platform capabilities – Windows, Laptop, Mac, Android, iPhone, iPod, iPad.
☆ Professional, Quick,Patient IT Expert Team 24/7/365 Onlinen Help You!
☆ We served more than 35,000 customers all around the world in last 5 years with 98.99% PASS RATE!
☆ Guaranteed Secure Shopping! Your Transcations are protected by Braindump2go all the time!
☆ Pass any exams at the FIRST try!

1[10]

http://www.braindump2go.com/70-410.html

         

Comments are closed.