This page was exported from Braindump2go Free Latest Microsoft Hot Exam Dumps In PDF & VCE Free Download [ https://www.symantecdumps.com ]
Export date: Thu Mar 28 12:42:57 2024 / +0000 GMT

Official 2014 Latest Microsoft 70-412 Exam Dump Free Download(321-330)!


QUESTION 321
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012.
Server1 is the enterprise root certification authority (CA) for contoso.com.
You need to enable CA role separation on Server1.
Which tool should you use?

A.    The Certutil command
B.    The Authorization Manager console
C.    The Certsrv command
D.    The Certificates snap-in

Answer: A

QUESTION 322
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server3. The network contains a standalone server named Server2.
All servers run Windows Server 2012 R2. The servers are configured as shown in the following table.
 clip_image001
Server3 hosts an application named Appl. App1 is accessible internally by using the URL https://appl.contoso.com. App1 only supports Integrated Windows authentication.
You need to ensure that all users from the Internet are pre-authenticated before they can access Appl.
What should you do?
To answer, drag the appropriate servers to the correct actions. Each server may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
 clip_image001[4]
Answer:
 clip_image001[6]

QUESTION 323
You have five servers that run Windows Server 2012 R2. The servers have the Failover Clustering feature installed. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table.
 clip_image001[8]
Server1, Server2, and Server3 are configured as the preferred owners of the cluster roles.
Dynamic quorum management is disabled.
You plan to perform hardware maintenance on Server3.
You need to ensure that if the WAN link between Site1 and Site2 fails while you are performing maintenance on Server3, the cluster resource will remain available in Site1.
What should you do?

A.    Add a file share witness in Site1.
B.    Enable DrainOnShutdown on Cluster1.
C.    Remove the node vote for Server4 and Servers.
D.    Remove the node vote for Server3.

Answer: C

QUESTION 324
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has access to disks that connect to a RAID controller, iSCSI disks, and disks connected to a SCSI controller.
You plan to use a tiered storage space on Server1.
You need to identify which storage controller and volume type you must use for the tiered storage space.
Which storage components should you use?
To answer, select the appropriate options in the answer area.
 clip_image001[10]
Answer:
 clip_image001[12]

QUESTION 325
Drag and Drop Question
Your network contains an Active Directory domain named adatum.com. The domain contains three servers. The servers are configured as shown in the following table.
 clip_image001[14]
Server1 is configured as shown in the exhibit. (Click the Exhibit button.)
 clip_image002[4]
Template1 contains custom cryptography settings that are required by the corporate security team.
On Server2, an administrator successfully installs a certificate based on Template1.
The administrator reports that Template1 is not listed in the Certificate Enrollment wizard on Server3, even after selecting the Show all templates check box.
You need to ensure that you can install a server authentication certificate on Server3. The certificate must comply with the cryptography requirements.
Which three actions should you perform in sequence?
To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.
 clip_image002[6]
Answer:
 clip_image002[8]

QUESTION 326
Your network contains an Active Directory domain named contoso.com.
You deploy a server named Server1 that runs Windows Server 2012 R2.
A local administrator installs the Active Directory Rights Management Services server role on Server1.
You need to ensure that AD RMS clients can discover the AD RMS cluster automatically.
What should you do?

A.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Schema Admins group, and then configure the proxy settings.
B.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Schema Admins group, and then register the Service Connection Point (SCP).
C.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Enterprise Admins group, and then register the Service Connection Point (SCP).
D.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Enterprise Admins group, and then configure the proxy settings.

Answer: C

QUESTION 327
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured to support key archival and recovery.
You create a new Active Directory group named Group1.
You need to ensure that the members of Group1 can request a Key Recovery Agent certificate. The solution must minimize the permissions assigned to Group1.
Which two permissions should you assign to Group1? (Each correct answer presents part of the solution. Choose two.)

A.    Read
B.    Auto enroll
C.    Write
D.    Enroll
E.    Full control

Answer: AD
Explanation:
* In Template, type a new template display name, and then modify any other optional properties as needed.
On the Security tab, click Add, type the name of the users you want to issue the key recovery agent certificates to, and then click OK. Under Group or user names, select the user names that you just added. Under Permissions, select the Read and Enroll check boxes, and then click OK.

QUESTION 328
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. All servers run Windows Server 2012 R2.
You install the IP Address Management (IPAM) Server feature on Server1.
From the Provision IPAM wizard, you select the Group Policy Based provisioning method and enter a GPO name prefix of IPAM1.
You need to provision IPAM by using Group Policy.
What command should you run on Server1 to complete the process?
To answer, select the appropriate options in the answer area.
 clip_image002[10]
Answer:
 clip_image002[12]

QUESTION 329
You have a server named DNS1 that runs Windows Server 2012 R2.
You discover that the DNS resolution is slow when users try to access the company intranet home page by using the URL http://companyhome.
You need to provide single-label name resolution for CompanyHome that is not dependent on the suffix search order.
Which three cmdlets should you run? (Each correct answer presents part of the solution.
Choose three.)

A.    Add-DnsServerPrimaryZone
B.    Add-DnsServerResourceRecordCName
C.    Set-DnsServerDsSetting
D.    Set-DnsServerGlobalNameZone
E.    Set-DnsServerEDns
F.    Add-DnsServerDirectory Partition

Answer: ABD
Explanation:
*The Add-DnsServerPrimaryZone cmdlet adds a specified primary zone on a Domain Name System (DNS) server.
* The Add-DnsServerResourceRecordCName cmdlet adds a canonical name (CNAME) resource record to a specified Domain Name System (DNS) zone. A CNAME record allows you to use more than one resource record to refer to a single host *The Set-DnsServerGlobalNameZone cmdlet enables or disables single-label Domain Name System (DNS) queries.
It also changes configuration settings for a GlobalNames zone.
The GlobalNames zone supports short, easy-to-use names instead of fully qualified domain names (FQDNs) without using Windows Internet Name Service (WINS) technology. For instance, DNS can query SarahJonesDesktop instead of SarahJonesDesktop.contoso.com.

QUESTION 330
Your network contains three servers named HV1, HV2, and Server1 that run Windows Server 2012 R2. HV1 and HV2 have the Hyper-V server role installed. Server1 is a file server that contains 3 TB of free disk space.
HV1 hosts a virtual machine named VM1. The virtual machine configuration file for VM1 is stored in D:VM and the virtual hard disk file is stored in E:VHD.
You plan to replace drive E with a larger volume.
You need to ensure that VM1 remains available from HV1 while drive E is being replaced. You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?

A.    Perform a live migration to HV2.
B.    Add HV1 and HV2 as nodes in a failover cluster. Perform a storage migration to HV2.
C.    Add HV1 and HV2 as nodes in a failover cluster. Perform a live migration to HV2.
D.    Perform a storage migration to Server1.

Answer: D

Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go's Latest Microsoft 70-412 Dump: http://www.braindump2go.com/70-412.html

Post date: 2014-06-13 07:59:07
Post date GMT: 2014-06-13 07:59:07
Post modified date: 2014-06-13 07:59:07
Post modified date GMT: 2014-06-13 07:59:07
Powered by [ Universal Post Manager ] plugin. HTML saving format developed by gVectors Team www.gVectors.com